The development of the Controlled Chaos technology was the result of an animal control agency’s request for a no lead .243 bullet that would provide extensive wound trauma with little minimal pass through energy. Basically the idea was to burst the bullet into numerous particles at a predetermined depth creating many wounds and a large temporary cavity with shot placement at or near the central nervous system. The agency had tried copper matrix frangible rounds and found the penetration depth and particle size were less than what was require for proper terminal performance.

The bullet is designed to penetrate to a specific depth and to fracture as the internal hydraulic pressure exceeds the hoop strength of the nose design.  At the time of fracture, a massive energy spike is released as the particles break away and radiate outward from the initial trajectory path.  This energy spike and resulting temporary cavity sends a shock wave through the animal’s circulatory and nervous systems immediately shutting down the functioning of these systems.

Since the development of the .243 bullet, we have successfully taken this design to other calibers.  The Controlled Chaos technology differs from the Controlled Fracturing technology in that the fracturing particles are smaller, the penetration depth of the smaller particles is less, and the initial energy transfer is greater.  These features make this an excellent bullet choice for varmint hunting, animal culling, fur hunting, and personal defense.

The Copper Version of our Controlled Chaos Bullet is designed to work at velocities as high as 4,200 fps to as low as 1,450 fps.  This operating range makes the bullet excellent for Full Length Barrels, SBR’s and AR Pistols.

Suppressor Safe — The projectile is machined from solid bar stock.  Expansion only occurs upon impact through hydraulic energy.  (They only expand when they hit “wet.”)  This is not a frangible bullet produced from powdered metal.

THIS IS NOT LOADED AMMUNITION 

Features

• Many wound channels resulting in extensive damage
• CNC machined from solid copper or brass, not formed or swaged
• Exceptional accuracy from the advanced manufacturing process
• A separate base for penetration along the original trajectory
• No lead designs for agencies requiring green projectiles

Note: This projectile was specifically designed for use in the 300 HAM’R and while it can be used in other cartridges, it may not provide optimum performance. If you wish to use this projectile for the 300 BLK, please note you will not reach optimum velocity due to case capacity constraints imposed by the bullets specifically designed geometry (shorter COAL when seated in a 300 BLK) for the 300 HAM’R.